Introducing the improved version of the MJJC Foam Cannon S V3

With MJJC commitment to 'Better Foam', our R&D team has designed a new and improved version of the MJJC Foam Cannon S.

What's New with Cannon S V3

• New & Improved structure & mechanism
  • Smoother Controls on the 360-degree spray pattern twist control.
• New Extended Suction Tube & Gravity Ball
  • Extended Suction Tube moves around the bottle ensuring snow foaming solution is completely dispensed without any wastage.
  • Gravity Ball ensures the suction tube stays at the bottom of the bottle & acts as a filter to prevent debris from entering the foam lance system.
• New & Improved Foam Lance to Bottle Quick Twist Lock
  • Improved bottle thread ensures tighter & more secure connection between Foam Lance & Bottle.
  • Quick Twist lock only requires a 90-degree turn to tighten the foam lance to the bottle.
  • Especially convenient when attaching or detaching the foam lance from the bottle with wet & soapy hands.
• New & Improved Foaming Technology - Lesser Solution, Thicker Foam
  • Thicker & more consistent 'Shaving Cream' thick foam.
  • Requires lesser snow foaming solution but produces thicker foam.
  • Reduced operational noise from foam lance.
• New Bottle Design
  • Wider Bottle mouth bottle eases filling snow foam shampoo and water.
  • Wider Bottle Base to avoid bottle tipping over.  

Orifice Guide

1.1mm orifice:             Under 1,595psi (110 Bar) pressure washer

1.25mm orifice:           1,595psi (110 Bar) ~ 2,175psi (150 Bar) pressure washer

1.35mm orifice:           2,175psi (150 Bar) ~ 4,061psi (280 Bar) pressure washer

1.65mm orifice:           4,061psi (280 Bar) ~ 4,931 (340 Bar) pressure washer

*Above information is for guide only. 

In the Box:

1 x MJJC Foam Cannon S V3

1 x Adapter compatible with your pressure washer (also available without adapters)

1 x 1.25mm Orifice nozzle pre-installed on the foam cannon

1 x 1.1mm Orifice nozzle

1 x Gravity Ball & Suction Tube

1 x User Manual

Comes with 1 year limited warranty (T&C applies)

Ships from Melbourne, Australia within 1 -3 business days

NOTE:

As we try our best to provide accurate compatibility for various pressure washer brands & models, these fittings maybe updated frequently depending on brands. 

To ensure we get it right the first time & to not delay your foaming experience, we advise customers to check your pressure washer's fittings with the images of the adapters on our product photos.

If unsure, kindly email us at info@mjjc.com.au with a photo of the connection between your pressure washer's trigger gun & spray wand.

If an incompatible adapter is ordered without contacting us, MJJC Australia will exchange the adapter without any charges. However postage for the return & delivery of the exchanging adapter will be borne by the customer. 

1. Please note that this product is to be used by adults only & keep away from children. MJJC Australia will not be responsible for any injury or damages if the product is not use for its purpose & with care.
2. Always perform a test before use by pointing the foam cannon away from vehicles or people and performing a test spray.
3. For thicker foam, try using warm water when mixing shampoo dilution.
4. Always wash your vehicle away from direct sunlight & rinse thoroughly to avoid shampoo streaks.
5. Always do a Pre-wash Foaming.
1. Foam your entire vehicle & wait for 5 minutes to soften hard dirt such as mud, bird droppings & road contaminants.
2. Rinse thoroughly with a pressure washer before contact wash to prevent damaging your vehicle's paintwork from scratches & swirls.
6.  For Contact wash, we recommend using the 2 bucket method (1 bucket clean water & 1 bucket shampoo) after foaming the vehicle.
1. Foam the vehicle by sections then contact wash with a MJJC Wash Mitt to agitate the remaining dirt on the vehicle's body.
2. Clean the wash mitt with the dirt trap / grit keeper in the clean water bucket to remove any hard dirt.
3. Then soak the MJJC wash mitt in the shampoo bucket to ensure the mitt is lubricated before contact wash. 
4. Rinse the section with shampoo immediately to avoid shampoo steaks. 
7. If the foam cannon stops & starts or stalls during first use, kindly stop dispensing foam. The foam cannon has gone into 'Safety Mode' & a different orifice might be required. Contact us for a compatible orifice.
8. Always flush the foam cannon at the end of every use to avoid clogging of the foam lance system.
1. Ensure the foam bottle is empty.
2. Turn the Foam Control Knob (top of foam lance) anti-clockwise to the end.
3. Activate the pressure washer's trigger gun & dispense water for approximately 50 seconds.