MJJC Foam Cannon S V3 - Hikoki Hitachi Pressure Washer (Snow Foam Lance Gun)
MJJC Foam Cannon S V3 - Hikoki Hitachi Pressure Washer (Snow Foam Lance Gun)
Introducing the improved version of the MJJC Foam Cannon S V3
With MJJC commitment to 'Better Foam', our R&D team has designed a new and improved version of the MJJC Foam Cannon S.
What's New with Cannon S V3
-
New & Improved structure & mechanism
- Smoother Controls on the 360-degree spray pattern twist control.
-
New Extended Suction Tube & Gravity Ball
- Extended Suction Tube moves around the bottle ensuring snow foaming solution is completely dispensed without any wastage.
- Gravity Ball ensures the suction tube stays at the bottom of the bottle & acts as a filter to prevent debris from entering the foam lance system.
-
New & Improved Foam Lance to Bottle Quick Twist Lock
- Improved bottle thread ensures tighter & more secure connection between Foam Lance & Bottle.
- Quick Twist lock only requires a 90-degree turn to tighten the foam lance to the bottle.
- Especially convenient when attaching or detaching the foam lance from the bottle with wet & soapy hands.
-
New & Improved Foaming Technology - Lesser Solution, Thicker Foam
- Thicker & more consistent 'Shaving Cream' thick foam.
- Requires lesser snow foaming solution but produces thicker foam.
- Reduced operational noise from foam lance.
-
New Bottle Design
- Wider Bottle mouth bottle eases filling snow foam shampoo and water.
- Wider Bottle Base to avoid bottle tipping over.
Orifice Guide
1.1mm orifice: Under 1,595psi (110 Bar) pressure washer
1.25mm orifice: 1,595psi (110 Bar) ~ 2,175psi (150 Bar) pressure washer
1.35mm orifice: 2,175psi (150 Bar) ~ 4,061psi (280 Bar) pressure washer
1.65mm orifice: 4,061psi (280 Bar) ~ 4,931 (340 Bar) pressure washer
*Above information is for guide only.
In the Box:
1 x MJJC Foam Cannon S V3
1 x Adapter compatible with your pressure washer (also available without adapters)
1 x 1.25mm Orifice nozzle pre-installed on the foam cannon
1 x 1.1mm Orifice nozzle
1 x Gravity Ball & Suction Tube
1 x User Manual
Comes with 1 year limited warranty (T&C applies)
Ships from Melbourne, Australia in 1 - 3 business days.
Ships nationwide to Australia & New Zealand
Postage calculated at Check-Out
NOTE:
As we try our best to provide accurate compatibility for various pressure washer brands & models, these fittings maybe updated frequently depending on brands.
To ensure we get it right the first time & to not delay your foaming experience, we advise customers to check your pressure washer's fittings with the images of the adapters on our product photos.
If unsure, kindly email us at info@mjjc.com.au with a photo of the connection between your pressure washer's trigger gun & spray wand.
If an incompatible adapter is ordered without contacting us, MJJC Australia will exchange the adapter without any charges. However postage for the return & delivery of the exchanging adapter will be borne by the customer.
Due to our experience of customers not returning the adapters in the exchange, customers are required to make an advance payment for the new adapter & will be refunded when we receive the returned adapter. We thank you for your kind understanding.
- Please note that this product is to be used by adults only & keep away from children. MJJC Australia will not be responsible for any injury or damages if the product is not use for its purpose & with care.
- Always perform a test before use by pointing the foam cannon away from vehicles or people and performing a test spray.
- For thicker foam, try using warm water when mixing shampoo dilution.
- Always wash your vehicle away from direct sunlight & rinse thoroughly to avoid shampoo streaks.
- Always do a Pre-wash Foaming.
- Foam your entire vehicle & wait for 5 minutes to soften hard dirt such as mud, bird droppings & road contaminants.
- Rinse thoroughly with a pressure washer before contact wash to prevent damaging your vehicle's paintwork from scratches & swirls.
- For Contact wash, we recommend using the 2 bucket method (1 bucket clean water & 1 bucket shampoo) after foaming the vehicle.
- Foam the vehicle by sections then contact wash with a MJJC Wash Mitt to agitate the remaining dirt on the vehicle's body.
- Clean the wash mitt with the dirt trap / grit keeper in the clean water bucket to remove any hard dirt.
- Then soak the MJJC wash mitt in the shampoo bucket to ensure the mitt is lubricated before contact wash.
- Rinse the section with shampoo immediately to avoid shampoo steaks.
- If the foam cannon stops & starts or stalls during first use, kindly stop dispensing foam. The foam cannon has gone into 'Safety Mode' & a different orifice might be required. Contact us for a compatible orifice.
- Always flush the foam cannon at the end of every use to avoid clogging of the foam lance system.
- Ensure the foam bottle is empty.
- Turn the Foam Control Knob (top of foam lance) anti-clockwise to the end.
- Activate the pressure washer's trigger gun & dispense water for approximately 50 seconds.
Compatible pressure washers:
Karcher K-Series | Karcher HD-Series | Karcher HD-EZ Lock Series | Gerni#2 | Ryobi | Bosch Aquatak | Ozito#1 | Black+Decker | Michelin | Nilfisk | Kranzle (D10) Quick Connect | Kranzle (D12) Quick Connect | STIHL#2 | AR Blue | Lavor| Makita | Aldi Workzone| Jet-USA | Typhoon | ¼" Quick Connect | BigBoi | M22-14mm | Husqvarna | Masport AVA | Mechpro Blue | Stanley | Fieryred
For other brands or models, kindly contact us
*If unsure which adapter suits your pressure washer, kindly contact us to inquire the compatible adapter for your pressure washer.
Care Instructions
Care Instructions
- For thicker foam, try filling shampoo & warm water
- Avoid dropping foam lance
After use care
- Empty bottle
- Turn Foam Control Knob (black knob on top of foam cannon) anti-clockwise till the end
- Activate trigger gun to dispense just water for approximately 1 minute
Troubleshooting if foam cannon starts & stops dispensing foam or dispenses diluted shampoo without foam
- Remove Suction Tube from foam cannon.
- Clear any residue blocking the inlet on the gravity ball
- Ensure the suction tube is not clogged with residue or sand
- Fill bottle with warm water
- Activate trigger gun to dispense just water till bottle is empty
Shipping & Returns
Shipping & Returns
Shipping
- Ships from Australia in 1-3 business days
- Ships nationwide to Physical Address, Parcel Locker & Parcel Collects except P.O. Boxes.
- Express Post option available at checkout
Returns
Due to the complexity of fittings for various pressure washer brands and models, kindly contact us for compatibility if unsure.
- MJJC Australia will exchange any wrong adapter ordered. However, Return & Adapter Exchange Postage will be borne by the customer.
Share
Complete your set-up
Combine your MJJC Trigger Gun with these interchangeable attachments via the 1/4" Quick Connect fitting.
-
Fast Shipping
Ships from Australia in 1-3 business days.
*Express Post Option available
Postage to Physical Address, Parcel Lockers or Parcel Collect only
-
Interchangeable Adapters
MJJC Foam Cannons offers a wide range of interchangeable adapters if you replace your current pressure washer.