MJJC's ULTIMATE Foam Cannon

The long awaited MJJC Foam Cannon Pro V3 has been Upgraded from the globally renowned Pro V2. We have made significant upgrades to the design, ergonomics & materials.

* MJJC Australia offers the Improved & Updated version Pro V3 bottles only.
** Kindly be aware that some versions sold overseas are the OLDER version bottles.

What's NEW on the MJJC Foam Cannon Pro V3:

F O A M    L A N C E   T E C H N O L O G Y

• MJJC's iconic 'Shaving Cream' Thick Snow Foam just became THICKER!
• Stainless Steel & Brass Parts for increased durability
• Reduced Chemical Usage = More Savings
• Quieter  
• Improved Corrosion Resistance
• Quick Attach Lance Cap (3/4' Circle Twist to secure onto bottle)
• Leak-Proof Lance Cap
  
• Smoother Twist Nozzle to control Spray Pattern & Direction

B O T T L E    D E S I G N

• Improved Bottle Design for better Grip & Ergonomics.
• Bottle Grip suitable for Left-Handed or Right-Handed use.
• Wide Mouth opening for easier filling of shampoo & water.
• Wide Bottle Base for improved stability, preventing bottle from toppling over. 
• 1,200ml bottle capacity
• 1,000ml Clear measurement indicators for easier dilution ratio settings

IN THE BOX

1. Pro V3 Foam Lance
2. Adapter (includes 2 additional O'Rings)
3. Pro V3 Bottle
4. Suction Tube with Gravity Ball
5. Orifices pack (1.1mm | 1.25mm (pre-installed) | 1.35mm
6. Mesh Kit

O R I F I C E    G U I D E

1.1mm orifice: for 90 Bar / 1,305PSI ~ 110 Bar / 1,595 PSI pressure washer

1.25mm orifice: for 110 Bar / 1,595PSI ~ 150 Bar / 2,175 PSI pressure washer

1.35mm orifice: for 150 Bar / 2,175 PSI ~ 280 Bar / 4,061 PSI pressure washer

1.65mm orifice: for 280 Bar / 4,061 PSI ~ 340 Bar / 4,931 PSI pressure washer

How to select a compatible foam cannon

1. Check the Brand & Model of your pressure washer 
   (Indicated on a plaque behind most pressure washers)
2. Select the MJJC Foam Cannon using the brand of your pressure washer.
3. If there are various adapters for the brand / model, kindly measure the dimensions of the fitting. In most cases, the width of the adapter would be the main difference.
4. Check the pressure washer's Maximum Pressure Output in PSI or Bar and identify which orifice you require.
5. If the foam cannon stops & starts or stalls during first use, kindly stop dispensing foam. The foam cannon has gone into 'Safety Mode' & a different orifice size might be required. Contact us for a compatible orifice.
6. If unsure which foam cannon model you require, kindly:

• Email us: info@mjjc.com.au
• Call or WhatsApp:  +61435 899 000

If an incompatible adapter is ordered without prior contact, MJJC Australia will exchange the adapter at no additional charge. However, postage for the return & delivery of the exchanging adapter will be borne by the customer. A prepayment of the new adapter will be required and will be refunded as soon as we receive the returned adapter in an unused condition.

We recommend providing us with an image of the connection between the spray wand end & trigger gun.

As we try our best to provide accurate compatibility for various pressure washer brands & models, these fittings may be updated frequently depending on brands. 

To ensure we get it right the first time & to not delay your foaming experience, we advise customers to check your pressure washer's fittings with the images and dimensions of the adapters on our product photos.

I M P O R T A N T    N O T E

1. Please note that this product is to be used by adults only & keep away from children.
   (MJJC Australia will not be responsible for any injury or damages if the product is not used for its purpose & with care.)
2. Always perform a test before use by pointing the foam cannon away from vehicles or people and performing a test spray.
3. Please use the recommended Orifice size based on our guide. Smaller orifice size DO NOT produce thicker foam. Excessive pressure to the foam cannon will cause back flow pressure towards the pressure washer, which may cause long term damage. 
4. Always flush the foam cannon at the end of every use to avoid clogging of the foam lance system.
   1. Ensure the foam bottle is empty.
   2. Turn the Foam Control Knob (top of foam lance) counter-clockwise to the end.
   3. Activate the pressure washer's trigger gun & dispense water for approximately 50 seconds.
      
5. Maintenance Parts - We recommend changing the Mesh Kit annually or when the foam thickness reduces over time.
   Other parts are available HERE. 
6. For more foam cannon maintenance tips, kindly click HERE.

PRO - TIP

1. For thicker foam, try using warm water when mixing & diluting shampoo.
2. Fill water first and then shampoo.
3. Foam your vehicle when dry. Wetting the vehicle will dilutes the thickness of the foam.
4. Always wash your vehicle away from direct sunlight & rinse thoroughly to avoid shampoo streaks.
5. For Pre-Wash foaming, we recommend maximum foam.
6. For Contact-Wash foaming, we recommend dialing down the foam thickness as lubricity is only required to avoid scratches & swirls. This saves a bit of shampoo.
7. For more Detailing Tips & Hacks including reviews of car detailing chemicals, kindly click HERE.

*Ships from Melbourne, Australia within 1-3 business days.