Skip to product information
1 of 4

Certa pressure washer - MJJC Foam Cannon Pro V2 (Pressure Washer Snow Foam Lance Gun)

Certa pressure washer - MJJC Foam Cannon Pro V2 (Pressure Washer Snow Foam Lance Gun)

Outline star
Outline star
Outline star
Outline star
Outline star
Filled star
Filled star
Filled star
Filled star
Filled star
(1)

Regular price $99.95
Regular price $105.95 Sale price $99.95
Sale Sold out
Tax included. Shipping calculated at checkout.

~ LIMITED RELEASE ~

Please not that the Adapters would be in BLUE rather than Black.

 

Features:

  • Produces incredibly 'Shaving Cream' thick snow foam with most foam cannon shampoos.
  • Thicker foam ensures longer dwell time on vehicle body 
  • Manufactured from high quality materialsBrass fittings & robust plastic parts
  • Uses lesser car wash shampoo.
  • Full bottle of snow foam shampoo dilution foams up to approximately 4 cars.
    • Most snow foam shampoos dilution ratio is 1:9.
    • MJJC bottle fills up to 1,000ml.

* Note: Increasing foam thickness increases shampoo consumption  

  • Compatible with pressure washers between 1,300PSI (90 Bar) to 4,931PSI (340 Bar).
  • Interchangeable orifice to suit different PSI. (refer to the Orifice Guide below)
  • Foam Cannon comes with pre-installed with a 1.25mm orifice. 
    • Additional 1.1mm orifice is included in the box.
  • Foam control knob on top of foam lance controls foam thickness.
    • Turn knob Clockwise for thicker foam
    • Turn knob Anti-Clockwise for lesser foam
  • Black turn control on lance controls fan for wide or spot spray pattern.
    • Clockwise to narrow fan
    • Anti-Clockwise to widen fan
  • 360° rotatable spray nozzle feature makes it easier to foam the top, side & chassis of your vehicle.
  • Robust Leak-proof bottle.
    • Wide bottle base to avoid bottle toppling over.
    • Wide mouth opening (5cm) for convenient filling of shampoo & water.
    • Large Bottle (1,200ml) with measurement groove up to 1,000ml.
    • Indentation on the base of bottle for easy attachment or removal of bottle when hands are soapy.
  • Leak-proof Foam Lance Cap. Plastic thread on bottle & cap screws on with ease & leak-proof.  
  • Threaded Copper connection connects adapter & fitting makes it easier to attach adapters. (NO PTFE tape or glue required)
  • Gravity Ball on suction tube (connected to bottom of foam lance & laid into bottle)
    • Acts as a filter to prevent residue from entering foam lance system & clogging.
    • Gravity ball moves around the bottom of the bottle ensuring shampoo is completely dispensed
  • New foam lance structure makes it easier to change nozzle orifice and mesh filter.
  • For a better vehicle washing experience, complete your set-up with the MJJC Light Weight Short Trigger Spray Gun & Spray wand or Spray Nozzle (5 in 1 spray pattern).

 

Orifice Guide
1.1mm orifice:             Under 1,595psi (110 Bar) pressure washer
1.25mm orifice:           1,595psi (110 Bar) ~ 2,175psi (150 Bar) pressure washer
1.35mm orifice:           2,175psi (150 Bar) ~ 4,061psi (280 Bar) pressure washer
1.65mm orifice:           4,061psi (280 Bar) ~ 4,931 (340 Bar) pressure washer
*Above information is for guide only.

 

In the Box:

1 x MJJC Foam Cannon Pro V2

1 x Adapter compatible with your pressure washer (also available without adapters)

1 x 1.25mm Orifice nozzle comes pre-installed on the foam cannon

1 x 1.1mm Orifice nozzle

1 x Gravity Ball & Suction Tube

1 x User Manual

1 year limited warranty (T&C applies)

Ships from Australia within 1-3 business days

* Since the beginning of 2022, MJJC have excluded the additional Mesh Filters as seen in some earlier 'Unboxing Videos' on YouTube.

Care Instructions

  • For thicker foam, try filling shampoo & warm water
  • Avoid dropping foam lance

After use care

  • Empty bottle
  • Turn Foam Control Knob (black knob on top of foam cannon) anti-clockwise till the end
  • Activate trigger gun to dispense just water for approximately 1 minute

Troubleshooting if foam cannon starts & stops dispensing foam or dispenses diluted shampoo without foam

  • Remove Suction Tube from foam cannon.
  • Clear any residue blocking the inlet on the gravity ball
  • Ensure the suction tube is not clogged with residue or sand
  • Fill bottle with warm water
  • Activate trigger gun to dispense just water till bottle is empty

Shipping & Returns

Shipping

  • Ships from Australia in 1-3 business days
  • Ships nationwide to Physical Address, Parcel Locker & Parcel Collects except P.O. Boxes.
  • Express Post option available at checkout

Returns

Due to the complexity of fittings for various pressure washer brands and models, kindly contact us for compatibility if unsure.

  • MJJC Australia will exchange any wrong adapter ordered. However, Return & Adapter Exchange Postage will be borne by the customer.

View full details

Complete your set-up

Combine your MJJC Trigger Gun with these interchangeable attachments via the 1/4" Quick Connect fitting.

  • Fast Shipping

    Ships from Australia in 1-3 business days.

    *Express Post Option available

    Postage to Physical Address, Parcel Lockers or Parcel Collect only

  • Interchangeable Adapters

    MJJC Foam Cannons offers a wide range of interchangeable adapters if you replace your current pressure washer.

Still unsure, get in-touch with us