Advwin pressure washer - MJJC Foam Cannon Pro V2 (Pressure Washer Snow Foam Lance Gun)
Advwin pressure washer - MJJC Foam Cannon Pro V2 (Pressure Washer Snow Foam Lance Gun)
~ LIMITED RELEASE ~
Please not that the Adapters would be in BLUE rather than Black.
Model Update:
Adwin 2800W 4300PSi - Adwin#2 (M22FLPRO)
* For Advwin pressure washers, please check the compatibility of the adapter/connector
** If unsure, kindly contact us or email us the details of your pressure washer
Features:
- Produces incredibly 'Shaving Cream' thick snow foam with most foam cannon shampoos.
- Thicker foam ensures longer dwell time on vehicle body
- Manufactured from high quality materials. Brass fittings & robust plastic parts.
- Uses lesser car wash shampoo.
- Full bottle of snow foam shampoo dilution foams up to approximately 4 cars.
- Most snow foam shampoos dilution ratio is 1:9.
- MJJC bottle fills up to 1,000ml.
* Note: Increasing foam thickness increases shampoo consumption
- Compatible with pressure washers between 1,300PSI (90 Bar) to 4,931PSI (340 Bar).
- Interchangeable orifice to suit different PSI. (refer to the Orifice Guide below)
- Foam Cannon comes with pre-installed with a 1.25mm orifice.
- Additional 1.1mm orifice is included in the box.
- Foam control knob on top of foam lance controls foam thickness.
- Turn knob Clockwise for thicker foam
- Turn knob Anti-Clockwise for lesser foam
- Black turn control on lance controls fan for wide or spot spray pattern.
- Clockwise to narrow fan
- Anti-Clockwise to widen fan
- 360° rotatable spray nozzle feature makes it easier to foam the top, side & chassis of your vehicle.
- Robust Leak-proof bottle.
- Wide bottle base to avoid bottle toppling over.
- Wide mouth opening (5cm) for convenient filling of shampoo & water.
- Large Bottle (1,200ml) with measurement groove up to 1,000ml.
- Indentation on the base of bottle for easy attachment or removal of bottle when hands are soapy.
- Leak-proof Foam Lance Cap. Plastic thread on bottle & cap screws on with ease & leak-proof.
- Threaded Copper connection connects adapter & fitting makes it easier to attach adapters. (NO PTFE tape or glue required)
- Gravity Ball on suction tube (connected to bottom of foam lance & laid into bottle)
- Acts as a filter to prevent residue from entering foam lance system & clogging.
- Gravity ball moves around the bottom of the bottle ensuring shampoo is completely dispensed.
- New foam lance structure makes it easier to change nozzle orifice and mesh filter.
- For a better vehicle washing experience, complete your set-up with the MJJC Light Weight Short Trigger Spray Gun & Spray wand or Spray Nozzle (5 in 1 spray pattern).
In the Box:
1 x MJJC Foam Cannon Pro V2
1 x Adapter compatible with your pressure washer (also available without adapters)
1 x 1.25mm Orifice nozzle comes pre-installed on the foam cannon
1 x 1.1mm Orifice nozzle
1 x Gravity Ball & Suction Tube
1 x User Manual
1 year limited warranty (T&C applies)
Ships from Australia within 1-3 business days
* Since the beginning of 2022, MJJC have excluded the additional Mesh Filters as seen in some earlier 'Unboxing Videos' on YouTube.
Care Instructions
Care Instructions
- For thicker foam, try filling shampoo & warm water
- Avoid dropping foam lance
After use care
- Empty bottle
- Turn Foam Control Knob (black knob on top of foam cannon) anti-clockwise till the end
- Activate trigger gun to dispense just water for approximately 1 minute
Troubleshooting if foam cannon starts & stops dispensing foam or dispenses diluted shampoo without foam
- Remove Suction Tube from foam cannon.
- Clear any residue blocking the inlet on the gravity ball
- Ensure the suction tube is not clogged with residue or sand
- Fill bottle with warm water
- Activate trigger gun to dispense just water till bottle is empty
Shipping & Returns
Shipping & Returns
Shipping
- Ships from Australia in 1-3 business days
- Ships nationwide to Physical Address, Parcel Locker & Parcel Collects except P.O. Boxes.
- Express Post option available at checkout
Returns
Due to the complexity of fittings for various pressure washer brands and models, kindly contact us for compatibility if unsure.
- MJJC Australia will exchange any wrong adapter ordered. However, Return & Adapter Exchange Postage will be borne by the customer.
Share
Complete your set-up
Combine your MJJC Trigger Gun with these interchangeable attachments via the 1/4" Quick Connect fitting.
-
Fast Shipping
Ships from Australia in 1-3 business days.
*Express Post Option available
Postage to Physical Address, Parcel Lockers or Parcel Collect only
-
Interchangeable Adapters
MJJC Foam Cannons offers a wide range of interchangeable adapters if you replace your current pressure washer.