COMBO - Karcher K-Series MJJC Light Weight Trigger Spray Gun + Spray Nozzle (5 in 1 Spray Patterns)
COMBO - Karcher K-Series MJJC Light Weight Trigger Spray Gun + Spray Nozzle (5 in 1 Spray Patterns)
Couldn't load pickup availability
Note: These hose tips are NOT compatible:
* If unsure, kindly contact us & send us a photo of the hose tip
1. Karcher Plastic hose tips
2. Classic Karcher pressure washers with hose tips
Compatible with the below Karcher hose tip only.
MJJC Trigger Gun (Karcher K-Series) + Spray Nozzle (5 in 1) Combo
Save $5.00 + Additional Shipping Costs
MJJC Light Weight Trigger Gun for Karcher K-Series
Compatible with Karcher K-Series Models:
K2 | K3 | K4 | K5 | K7
* MJJC Trigger Gun adapters are interchangeable if you upgrade your pressure washer
Upgrade your pressure washer Spray Trigger Gun with MJJC Light Weight High Pressure Washer Trigger Gun.
Improved ergonomics & higher spray output, MJJC engineers designed a lighter trigger gun which performs better than the OEM trigger gun.
The live swivel joint allows a kink-free & anti-twist washing experience.
MJJC Trigger guns are manufactured from high quality materials & brass connectors similar to the MJJC Foam Cannon Pro V2.
Compliment your car wash set-up with the MJJC Trigger Gun to improve your car washing experience.
MJJC Spray Nozzle (5 in 1 spray patterns) 1/4" Quick Connect Adapter
MJJC Spray Nozzle comes with 5 different spray settings and can be conveniently connected with the 1/4" Quick Connect fitting to compliment your use with the MJJC Light Weight Pressure Washer Short Trigger Spray Gun.Just twist the nozzle to change the spray pattern.
5 Spray Patterns with just a twist.
Spray settings:
- 0°
- 15°
- 25°
- 40°
- 65° (Low Pressure)
Note: Max Pressure: 200 Bar (3,000psi)
In-the-box:
-
MJJC Short Trigger Gun + hose adapter
-
MJJC Spray Nozzle (5 in 1 spray pattern)
Note:
- Max Pressure: 200 Bar (3,000psi)
- MJJC Trigger gun converts your OEM trigger gun connector end to 1/4" Quick Connect
- OEM Spray Wand adapter will not be compatible after changing to MJJC Trigger Gun
WARNING:
- Before use, always check Spray Tip connection with wand before using
- After checking, always point the spray wand away from people or vehicles & then test water pressure
- Always perform a test spray on the ground before pointing at your vehicle
- Always begin test spraying the wand from a distance to avoid damaging your vehicle paint work
*** MJJC Australia will not be responsible for any damage or injuries if the item is not used in a proper manner. Keep item away from children, this item should only be used by an adult.
* Ships in 1-3 business days
* 1 year warranty (terms & conditions apply)
Care Instructions
Care Instructions
- For thicker foam, try filling shampoo & warm water
- Avoid dropping foam lance
After use care
- Empty bottle
- Turn Foam Control Knob (black knob on top of foam cannon) anti-clockwise till the end
- Activate trigger gun to dispense just water for approximately 1 minute
Troubleshooting if foam cannon starts & stops dispensing foam or dispenses diluted shampoo without foam
- Remove Suction Tube from foam cannon.
- Clear any residue blocking the inlet on the gravity ball
- Ensure the suction tube is not clogged with residue or sand
- Fill bottle with warm water
- Activate trigger gun to dispense just water till bottle is empty
Shipping & Returns
Shipping & Returns
Shipping
- Ships from Australia in 1-3 business days
- Ships nationwide to Physical Address, Parcel Locker & Parcel Collects except P.O. Boxes.
- Express Post option available at checkout
Returns
Due to the complexity of fittings for various pressure washer brands and models, kindly contact us for compatibility if unsure.
- MJJC Australia will exchange any wrong adapter ordered. However, Return & Adapter Exchange Postage will be borne by the customer.
Complete your set-up
Combine your MJJC Trigger Gun with these interchangeable attachments via the 1/4" Quick Connect fitting.